以太网芯片

描述：应用功能：以太网控制器 接口类型：SPI 电源电压：2.97V~3.63V 电源电流：132mA Hardwired TCP/IP embedded Ethernet controller that provides easier Internet connection to embedded systems

描述： Microchip's?LAN8720A/LAN8720Ai?are?high-performance, small-footprint, low-power 10BASE-T/100BASE-TX transceivers specifically designed for today's consumer electronics, industrial and enterprise applications. The LAN8720A/LAN8720Ai?are the industry's smallest footprint solutions with up to 40% lower power consumption than existing Microchip transceivers. The LAN8720A/LAN8720Ai have an integrated voltage regulator and ESD protection components to help reduce Bill of Material (BOM) costs.The?LAN8720A/LAN8720Ai connect via an RMII interface.?These devices support HP Auto-MDIX?, employ Microchip's proprietary flexPWR technology and?are available in both extended commercial (0° to 85°C) and industrial (-40° to 85°C) temperature range options.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in*.?HP Auto-MDIX eliminates the need for special "crossover" cables when connecting LAN devices together.*TheLANCheck online design reviewservice is subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述：应用功能：以太网收发器 通道数：1 接口类型：RMII 电源电压：1.6V~3.6V Microchip's?LAN8720A/LAN8720Ai?are?high-performance, small-footprint, low-power 10BASE-T/100BASE-TX transceivers specifically designed for today's consumer electronics, industrial and enterprise applications. The LAN8720A/LAN8720Ai?are the industry's smallest footprint solutions with up to 40% lower power consumption than existing Microchip transceivers. The LAN8720A/LAN8720Ai have an integrated voltage regulator and ESD protection components to help reduce Bill of Material (BOM) costs.The?LAN8720A/LAN8720Ai connect via an RMII interface.?These devices support HP Auto-MDIX?, employ Microchip's proprietary flexPWR technology and?are available in both extended commercial (0° to 85°C) and industrial (-40° to 85°C) temperature range options.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in*.?HP Auto-MDIX eliminates the need for special "crossover" cables when connecting LAN devices together.*TheLANCheck online design reviewservice is subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述：应用功能：物理层收发器 接口类型：MII, SNI, SMI 电源电压：2.97V~3.63V

描述： Microchip's ENC28J60 is a 28-pin, 10BASE-T stand alone Ethernet Controller with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface. With a small foot print package size the ENC28J60 minimizes complexity, board space and cost. Target applications include VoIP, Industrial Automation, Building Automation, Home Control, Security and Instrumentation.Ethernet Application Design CenterMicrochip's complimentary and confidential LANCheck online design review services are available for customers who have selected our products for their application design-in*.*TheLANCheck online design review?serviceis subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述：

描述： Microchip's?LAN8720A/LAN8720Ai?are?high-performance, small-footprint, low-power 10BASE-T/100BASE-TX transceivers specifically designed for today's consumer electronics, industrial and enterprise applications. The LAN8720A/LAN8720Ai?are the industry's smallest footprint solutions with up to 40% lower power consumption than existing Microchip transceivers. The LAN8720A/LAN8720Ai have an integrated voltage regulator and ESD protection components to help reduce Bill of Material (BOM) costs.The?LAN8720A/LAN8720Ai connect via an RMII interface.?These devices support HP Auto-MDIX?, employ Microchip's proprietary flexPWR technology and?are available in both extended commercial (0° to 85°C) and industrial (-40° to 85°C) temperature range options.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in*.?HP Auto-MDIX eliminates the need for special "crossover" cables when connecting LAN devices together.*TheLANCheck online design reviewservice is subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述：

描述：应用功能：以太网收发器 通道数：1 电源电压：1.8V；3.3V 电源电流：160mA

描述：

描述： The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O interface support.The KSZ8081RNx offers the Reduced Media Independent Interface (RMII) for direct connection to RMII-compliant MACs in Ethernet processors and switches. As the power-up default, the KSZ8081RNA uses a 25MHz crystal to generate all required clocks, including the 50MHz RMII reference clock output for the MAC. The KSZ8081RND is the version that takes in the 50MHz RMII reference clock as the power-up default.The KSZ8081MLX and KSZ8081MNX offer the Media Independent Interface (MII) for direct connection with MII-compliant Ethernet MAC processors and switches. A 25MHz crystal is used to generate all required clocks.To facilitate system bring-up and debugging in production testing and in product deployment, parametric NAND tree support enables fault detection between KSZ8081RNA I/Os and the board. Microchip's LinkMD TDR-based cable diagnostics identify faulty copper cabling.The KSZ8081RNA and KSZ8081RND are available in 24-pin, lead-free QFN packages. The KSZ8081MNX and KSZ8081RNB are available in 32-pin, lead-free QFN packages. The KSZ8081MLX is available in 48-pin (7mm x 7mm) LQFP package.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in.?TheLANCheck online design review?serviceis subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述：应用功能：以太网收发器 通道数：1 接口类型：MII, RMII, SNI 电源电压：3V~3.6V DP83848I PHYTER 工业温度单端口 10/100 Mb/s 以太网物理层收发器

描述：工作温度：0℃~+70℃

描述：应用功能：以太网收发器 接口类型：GMII, MII, RGMII 电源电压：1.43V~3.63V

描述：应用功能：以太网控制器 接口类型：MII, SPI, USB 电源电压：1V~5.25V 电源电流：60mA RTL8152B-VB-CG QFN-24 USB转以太网控制器

描述：

描述：

描述： The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O interface support.The KSZ8081RNx offers the Reduced Media Independent Interface (RMII) for direct connection to RMII-compliant MACs in Ethernet processors and switches. As the power-up default, the KSZ8081RNA uses a 25MHz crystal to generate all required clocks, including the 50MHz RMII reference clock output for the MAC. The KSZ8081RND is the version that takes in the 50MHz RMII reference clock as the power-up default.The KSZ8081MLX and KSZ8081MNX offer the Media Independent Interface (MII) for direct connection with MII-compliant Ethernet MAC processors and switches. A 25MHz crystal is used to generate all required clocks.To facilitate system bring-up and debugging in production testing and in product deployment, parametric NAND tree support enables fault detection between KSZ8081RNA I/Os and the board. Microchip's LinkMD TDR-based cable diagnostics identify faulty copper cabling.The KSZ8081RNA and KSZ8081RND are available in 24-pin, lead-free QFN packages. The KSZ8081MNX and KSZ8081RNB are available in 32-pin, lead-free QFN packages. The KSZ8081MLX is available in 48-pin (7mm x 7mm) LQFP package.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in.?TheLANCheck online design review?serviceis subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述： The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O interface support.The KSZ8081RNx offers the Reduced Media Independent Interface (RMII) for direct connection to RMII-compliant MACs in Ethernet processors and switches. As the power-up default, the KSZ8081RNA uses a 25MHz crystal to generate all required clocks, including the 50MHz RMII reference clock output for the MAC. The KSZ8081RND is the version that takes in the 50MHz RMII reference clock as the power-up default.The KSZ8081MLX and KSZ8081MNX offer the Media Independent Interface (MII) for direct connection with MII-compliant Ethernet MAC processors and switches. A 25MHz crystal is used to generate all required clocks.To facilitate system bring-up and debugging in production testing and in product deployment, parametric NAND tree support enables fault detection between KSZ8081RNA I/Os and the board. Microchip's LinkMD TDR-based cable diagnostics identify faulty copper cabling.The KSZ8081RNA and KSZ8081RND are available in 24-pin, lead-free QFN packages. The KSZ8081MNX and KSZ8081RNB are available in 32-pin, lead-free QFN packages. The KSZ8081MLX is available in 48-pin (7mm x 7mm) LQFP package.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in.?TheLANCheck online design review?serviceis subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述：

描述： DP83848C PHYTER 商用温度单端口 10/100 Mb/s 以太网物理层收发器

描述： Microchip's?LAN8720A/LAN8720Ai?are?high-performance, small-footprint, low-power 10BASE-T/100BASE-TX transceivers specifically designed for today's consumer electronics, industrial and enterprise applications. The LAN8720A/LAN8720Ai?are the industry's smallest footprint solutions with up to 40% lower power consumption than existing Microchip transceivers. The LAN8720A/LAN8720Ai have an integrated voltage regulator and ESD protection components to help reduce Bill of Material (BOM) costs.The?LAN8720A/LAN8720Ai connect via an RMII interface.?These devices support HP Auto-MDIX?, employ Microchip's proprietary flexPWR technology and?are available in both extended commercial (0° to 85°C) and industrial (-40° to 85°C) temperature range options.Microchip's complimentary and confidential LANCheck online design review service is available for customers who have selected our products for their application design-in*.?HP Auto-MDIX eliminates the need for special "crossover" cables when connecting LAN devices together.*TheLANCheck online design reviewservice is subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.

描述：

描述：

描述：

描述：应用功能：以太网控制器 接口类型：MII 电源电压：3.135V~3.465V 电源电流：170mA 带PHY的通用以太网控制器

描述： 高性能以太网控制器

描述：应用功能：物理层收发器 通道数：1 接口类型：MII, SMI, TP 电源电压：3.3V 电源电流：56mA

描述：应用功能：物理层收发器 通道数：1 接口类型：I2C, SMI 电源电压：1.8V；3.3V 电源电流：120mA SINGLE-CHIP/SINGLE-PORT 10/100M FAST ETHERNET PHYCEIVER

描述：应用功能：以太网控制器 通道数：1 接口类型：MII, MIIM 电源电压：3.1V~3.6V 电源电流：160mA Microchip's ENC28J60 is a 28-pin, 10BASE-T stand alone Ethernet Controller with on board MAC & PHY, 8 Kbytes of Buffer RAM and an SPI serial interface. With a small foot print package size the ENC28J60 minimizes complexity, board space and cost. Target applications include VoIP, Industrial Automation, Building Automation, Home Control, Security and Instrumentation.Ethernet Application Design CenterMicrochip's complimentary and confidential LANCheck online design review services are available for customers who have selected our products for their application design-in*.*TheLANCheck online design review?serviceis subject to?Microchip'sProgram Terms and Conditionsand requires a myMicrochip?account.